Grundfos Pumps

We are a proud Canadian Grundfos Pump distributor & authorized Grundfos Service Centre for all industrial and municipal product lines. North Fringe sell and service Wastewater Pumps such as their SEG Grinder and submergible SL, SLV, SE, SEV Pumps, and accessories, Prefabricated Lift Stations (PLS), Grundfos Controls, DDA & DME Digital Dosing Pumps,  CR & CRE Pumps, Hydro MPC Pumps, KP Horizontal Split Case, KPV and KPVS, as well as boosters, circulators and well pumps.

SEG

SL/ SLV

Main characteristics

• Designed for submerged installation
• SL pumps fitted with closed S-tube® impeller
• SLV pumps are fitted with patented semi-open Super Vortex impeller
• Available in FM and sensor versions

Main performance

• 2-15 HP
• 3Ph 208-230V, 230/460V, 575V
• Heads to 152 Feet
• Flows to 1,300 GPM
• 2.5” to 6” Discharge

SE/ SEV

Main characteristics

• Submerged or dry pit installation
• SE pumps standard with closed S-tube®,
• SEV pumps have SuperVortex impeller
• Cartridge seal & built-in sensors
• Patented cable entry – leakproof
• Many data communication and connectivity possibilities

Main performance

• 15-42 HP
• 3PH – 208-230V, 230/460V, 575V
• Heads to 279 Feet
• Flows to 5,390 GPM
• 3” to 12” Discharge

Grundfos Packaged Lift Stations

Includes: Wet Well, Hatch, Guide Rail, Stainless steel outlet pipe, Vent, Fittings and Valves and Level Control

Key Features

• Modular design
• Glass fibre reinforced polyester
• Separate wet well and valve box
• 304 SS Piping & connections
• Single source supplier
• All components fit perfectly

Completely Customizable!

Pumps, level sensors, controls, Insulation & heat tracing

S-Tube®

S-tube® impeller has excellent hydraulic efficiency and free solids passage for 2”,3” or 4” spherical passage!

Smooth uniform inner diameter. – no dead zones or edges, less likely to cause a back-up. Transports larger volume and diversity of wastewater over longer distances using less energy. Closed one channel S-tube® impeller is wet balanced, reducing vibrations and wobble.

Lessens the need to offer more pump models to meet design requirements as it can maintain high efficiency over  75% of the curve range!

Grundfos Patented Super Vortex Impeller

Heavy-duty Super Vortex design for 2.5”, 3” or 4” free passage. Materials pass freely through the pump without getting caught—patented design, available in cast iron or stainless steel.

Excellent choice for large solids, fibrous stations, and up to 5% dry solids.

Grundfos Digital Dosing Pumps

Using a 3-way repositionable control cube, DDA provides a “click wheel” to navigate you through their intuitive user interface. Adjust simple settings, intelligent programming, performance; view stored system faults and maintenance reminders.

The Digital Dosing Pump’s heart is a variable speed Stepper Motor, delivering a smooth and accurate 3000:1 turndown, all while using a full pump stroke. The feature-rich DDA can be operated as a standalone or through advanced process input control (0/4-20 mA) and output relays. An optional integrated flow meter provides additional peace of mind, as do these intelligent features:

Features

• FlowAdapt
• FlowControl with selective fault diagnosis
• Pressure monitoring
• Auto deaeration & Anti-cavitation
• SlowMode for viscous fluids

Range

DDA “S”  – AR & FCM
Model 7.5-16:  0.0007 to 2.0 gph / 232 psig
Model 12-10:  0.0031 to 3.1 gph / 150 psig
Model 17-7:  0.0045 to 4.5 gph / 100 psig
Model 30-4:  0.008 to 8.0 gph / 60 psig

DDA “XL” – AR & FCM
Model 60-10: 0.019 to 15.8 gph / 145 psig
Model 120-7: 0.039 to 31.7 gph / 100 psig
Model 200-4: 0.066 to 52.8 gph / 58 psig

All “S” & “XL” Models available in PVC, PVDF & SS

Grundfos CR, CRN, CRE, CRE-DP, CRIE, CRNE, CRT

The Grundfos CR Series of Inline multistage centrifugal pumps are highly reliable and easy to service while utilizing a tiny footprint. Pumps are capable of low NPSH, NSF 61, complex liquids, horizontal mounting, and high temperatures.

Range

CR – Multi-stage, Vertical In-Line Pump

Grundfos CR is a vertically mounted multistage centrifugal pump. The inline pump design enables installation in a horizontal one-pipe system where the suction and discharge ports are in the same plane and have the same pipe dimension.

CRN – Vertical, Multistage Centrifugal 316SS Pump

Grundfos CRN is a vertically mounted multistage centrifugal pump. The inline pump design enables installation in a horizontal one-pipe system where the suction and discharge ports are in the same plane and have the same pipe dimension. The pump housing and impeller are SS316.

CRE – Vertical, Multistage Centrifugal SS Fitted Pump

Grundfos CRE is a vertically mounted multistage centrifugal pump with an integrated Grundfos variable frequency drive. The inline pump design enables installation in a horizontal one-pipe system where the suction and discharge ports are in the same plane and have the same pipe dimension.

CRE-DP – Vertical, Multistage Centrifugal SS Fitted Pump with Sensor

Grundfos CRE-DP is a vertically mounted multistage centrifugal pump with an integrated Grundfos variable frequency drive. The pump contains a factory-mounted and pre-configured differential pressure sensor.

CRIE – Vertical, Multistage Centrifugal 304SS Pump

Grundfos CRIE is a vertically mounted multistage centrifugal pump with an integrated Grundfos variable frequency drive. The inline pump design enables installation in a horizontal one-pipe system where the suction and discharge ports are in the same plane and have the same pipe dimension. The pump housing and impeller are SS304.

CRNE – Vertical, Multistage Centrifugal 316SS Pump

Grundfos CRNE is a vertically mounted multistage centrifugal pump with an integrated Grundfos variable frequency drive. The inline pump design enables installation in a horizontal one-pipe system where the suction and discharge ports are in the same plane and have the same pipe dimension. The pump housing and impeller are SS316.

CRT – Vertical, Multistage Centrifugal Titanium

Vertical, multistage centrifugal pump. Materials in contact with the liquid are in Titanium. Titanium has exceptional resistance to a wide range of acids, alkalis, seawater and industrial chemicals

Grundfos Hydro MPC-E

The Hydro MPC-E features a booster set of pumps and motors with integrated frequency converters. The Hydro MPC-E makes sure that the flow and the pressure are continuously adapted to the system demands to make your system highly efficient. The procedure usually consists of 2 to 6 identical pumps in parallel, mounted on a base frame and connected to a control cabinet.

At the heart of the Hydro MPC, booster system is the CU352, a multi-pump controller. The CU352 controls how many pumps should be in operation at any given time and controls the speed of the individual pump. The advanced controller optimizes the performance of the booster system to minimize energy loss.

CU352 performs a complex task, and installing and operating the unit is simple. The installation wizard guides the installer through a series of steps until the booster system is correctly installed and commissioned. The installation process is performed by following the on-screen instructions of the control unit. The simple, user-friendly interface ensures that the day-to-day operation is equally easy.

Compatible with the following communication systems:
Ethernet(built-in VNC server is standard)
PROFIBUS via CIM modules
LON via CIM modules
Modbus RTU via CIM modules
GSM and GPRS via CIM modules
PLC via IO351B module
GRM via CIM
Modbus TCP via CIM modules
PROFINET IO via CIM modules
BACnet MS /TP via CIM

Hydro Multi-B/E

Grundfos KP

The Grundfos KP horizontal split-case pump is a single-stage, between-bearing, double-suction pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework. The independent bearing housing allows for ease of maintenance without removing the top casing.

The double volute design reduces the radial load on the shaft, extending component life, minimizing vibration and providing quiet operation.

Grundfos LC, LF and LCS

The Grundfos LC is a close-coupled centrifugal end suction pump in a compact design for optimized space savings. The Grundfos LF version is the same pump but in a frame-mounted format for added durability. Both LC and LF pumps offer high efficiency, and their double volute design lowers lifecycle costs and prolongs seal and bearing life. NSF61/50 certification is available.

Grundfos LCS is a single-stage, end suction, split coupled, base mounted centrifugal pump. Its smaller footprint with no alignment and grouting requirement in the field makes it a unique pump design. The pump features axially split coupling, capable of withstanding all torsional, axial, and radial loads. 

Grundfos KPV and KPVS:

The single-stage pumps offer robust and reliable operation in a compact, vertically mounted frame. The pump’s double volute design balances radial loads while extending the life of wear rings, shaft seals and bearings. These pumps are highly customizable and perfect for retrofits or specialized applications in small spaces, with many material options.

IO 113 – Input Module IO 113 designed to interface with pump sensors. One without communication as standard variant and one with communication for interface to Sensor Module SM 113

SM113 – Sensor Module SM113 is designed to interface with pump sensors and communicate via powerline to IO 113.

MP 204 – Designed to protect a single or three-phase asynchronous motor/pump. Must permanently be installed in a cabinet.

CIM/CIU – Communication Interface Module (CIM) and Communication Interface Unit (CIU) enable data communication via open & interoperable networks such as Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LonWorks, PROFIBUS DP, PROFINET IO, EtherNet/IP, etc.

LC 241 – The pump control boxes for level control, monitoring and protection of pumping systems in one or two pump applications in 208/240/460V and up to 32A starting direct-on-line. The control boxes are used in many types of empty or filling applications.

LC 231 – The pump control boxes for level control, monitoring and protection of Grundfos pumping systems – one pump (up to 9.6A) or two pumps (up to 7.6A each) starting direct-on-line. The control boxes are used in many types of empty or filling applications.

CU 352 – Designed to control up to six pumps in water boosting stations.

CU 362 – Designed to control groups of up to six pumps in sewage pumping stations. An excellent choice for wastewater lift stations, storm water stations, influent/effluent stations and many other similar applications.

GRM – Grundfos Remote Management is an internet/GPRS-based monitoring, control and reporting system for pump installations. Get easy access to data and alarms from pumps, controllers, sensors and meters.

CUE – Grundfos’ Variable Frequency Drives preconfigured to optimize motors on Grundfos pumps.

CUS Technical data
1 x 200-240 V
2 x 200-240 V
3 x 380-500 V
3 x 525-600 V
3 x 575-690 V.

Application
Adjustment of the pump performance to demand. With sensors, the CUE offers these control modes:
• proportional differential pressure
• constant differential pressure
• constant pressure
• constant pressure with stop function
• constant level
• constant level with stop function
• constant flow rate
• constant temperature.

The CUE can also be controlled by an external signal or via GENIbus.

Features and benefits
Adjustment of the pump performance to the demand, saving energy.
Easy installation, as the CUE is designed for Grundfos pumps.
Short-circuit-protected output; no motor protective circuit breaker required.
Fault indication via display and a relay, if fitted.
External setpoint influence via three programmable inputs.

TPE3 and Magna3

The TPE3 Single-stage stainless steel in-line pumps with frequency converters, differential pressure sensor and temperature sensor.

 

 

 

 

The MAGNA3 circulator is a highly-advanced canned rotor pump intended for large commercial buildings such as hospitals and schools. Intelligent features such as AUTOADAPT and FLOWADAPT select the optimal system setting, ensuring that your system always provides the best possible comfort and the most efficient operation. Connect the pump to a building management system and get complete control and monitoring of the system and improve reliability at the same time. You can also use the Grundfos GO Remote for monitoring purposes, giving you access to system data right at your fingertips.

Suitable for:

• Drinking water treatment
• Cooling
• Desalination
• Industrial heating
• Municipal water transportation